Dual SIM Router LGA-D2

SPECIFICATIONS

Hardware System
Watchdog: Built-in watchdog
LEDs: SYS, NET, USR, RSSI x 3
Reset Button: Reset/restore to factory default button
Ingress Protection: IP30
Housing & Weight: Metal, 300 g
Dimensions: 106mm x 106mm x 40mm
Installations: DIN-rail mounting
Operating Temperature: -40 °C to 75 °C
Operating Humidity: 5% to 95% non-condensing

Approval
EMI: EN 55032:2012 Class B
EMS:
IEC 61000-4-2 ESD: IEC 61000-4-3 RS:
IEC 61000-4-4 EFT: IEC 61000-4-5 Surge:
IEC 61000-4-6 CS:
Level 4
Level 3
Level 3
Level 3
Level 3
Vibration:EN50155

Cellular
Frequency Bands:

4G(LTE)
AU&NZ: B1/B2/B3/B4/B5/B7/B28, B40
EMEA: B1/B3/B5/B7/B8/B20, B38/B40/B41
America: B2/B4/B12/B13
Japan: B1/B3/B8/B18/B19/B26, B41
China: B1/B3/B8, B34/B38/B39/B40/B41
WCDMA: B1/B2/B4/B5/B8/B19
TD-SCDMA: B34/B39
GSM/EDGE: B2/B3/B5/B8

For other Bands, kindly contact us.

SIM: 2 x SIM slots, 1.8V / 3V
SIM Failover: Auto-switch cases: weak signal, data limited, SMS limited, no network, network denied, data connection fail
Auto APN List: Operator APN list
Mobile Quota Control: Set up customized data limits for both SIM cards
Number of Antennas: 2 (MAIN + AUX)
Connector: SMA female

Ethernet
Number of Ports: 1 x WAN + 1 x LAN or 2 x LAN
Port Type: Auto 10/100 Mbps, auto MDI/MDIX
Magnet Isolation Protection: 1.5 KV

Wi-Fi (Optional)
Wireless Mode: IEEE 802.11b/g/n, Access Point (AP), Client
Wireless Speed: 2*2 MIMO, 300 Mbps
Wireless Security: WPA, WPA2, TKIP, CCMP
Frequency Bands: 2.412 – 2.484 GHz (2.4 GHz ISM band)
Antennas: 2 x RP-SMA for Wi-Fi antenna connectors

Serial
Number of Ports: 1 x RS-232 (3 PIN) + 1 x RS-485
Connector: Terminal block
ESD Protection: ± 15 KV
Baud Rate: 300bps to 115200bps

Digital Input & Output
Type: 2 x DI + 2 x DO
Connector: Terminal block
Isolation: 3KVDC or 2KVrms
Absolute maximum VDC: 36VDC
Absolute maximum ADC: 100 mA

VPN
OpenVPN: Multiple clients can be running simultaneously
IPsec: IKEv1, IKEv2, supports up to 5 x IPsec VPN tunnels
DMVPN: Dynamic Multipoint Virtual Private Networking DMVPN

Network
Routing: Static routing
Network Protocols: TCP, UDP, IPv4, ICMP, NTP, DNS, HTTP, HTTPS, ARP, PPP, PPPoE, DHCP
Connection Manager: Ping Detection, Timer Reboot, ICMP for link detection
DHCP: Static and dynamic IP allocation
DDNS: Supported some service providers, others can be configured manually
Network Backup: Cellular, Wired and Wi-Fi WAN options, each of which can be used as backup
Firewall: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

Monitoring & Management
Web GUI: HTTP/HTTPS, firmware upgrade
Command Line Interface: SSHv2 and TELNET
3rd party platform: Pending
SNMP (Pending)
SNMP (v1, v2, v3), SNMP trap

Power

Connector: 3-pin 3.5 mm female socket with lock
Input Voltage Range: 9 to 48 VDC

Power Consumption
Idle: 100 mA@12 V
Data link: 400 mA (peak) @12 V